PLANET WGSD-10020 - Manual (Page 423)

User’s Manual of WGSD-10020 Series
423
Example:
Enable the ARP inspection mode of port 1
WGSD-10020HP:/>
security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [<port_list>] add|delete <vid> <allowed_mac> <allowed_ip>
Parameters:
<port_list> : Port list or 'all', default: All ports
add : Add new port ARP inspection static entry
delete : Delete existing port ARP inspection static entry
<vid> : VLAN ID (1-4095)
<allowed_mac>: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing ARP request
<allowed_ip> : IP address (a.b.c.d), IP address allowed for doing ARP request
Example:
Add ARP inspection static entry.
WGSD-10020HP:/>
security network arp inspection entry 1 add 1 00-30-4f-00-00-11
192.168.0.11
Security Network ARP Inspection Status
Description:
Show ARP inspection static and dynamic entries.
Syntax:
Security Network ARP Inspection Status [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example: