PLANET IGS-10020HPT - Manual (Page 335)

User’s Manual of IGS-10020PT / IGS-10020HPT
335
4.16.3 Port Configuration
This section allows the user to inspect and configure the current PoE port settings ; screen in Figure 4-16-3 appears.
Figure 4-16-3: Power over Ethernet Configuration Screenshot
The page includes the following fields:
Object Description
• PoE Mode
There are three modes for PoE mode.

Enable: enable PoE function..

Disable: disable PoE function.

Schedule: enable PoE function in schedule mode.
• Schedule
Indicates the schedule profile mode. Possible porifles are:

Profile1

Profile2

Profile3

Profile4
• AF/AT Mode
Allows user to select 802.3at or 802.3af compatibility mode. The default value is
802.3at mode. This function will affect PoE power reservation on Classification
power limit mode only as 802.3af mode and system are going to reserve a
maximum of 15.4W for PD that supports Class3 level. IEEE 802.3at mode and
system are going to reserve 30.8 watts for PD that supports Class4 level. Class1
to class3 level in the 802.3at mode will reserve the same PoE power in the
802.3af mode. (Only IGS-10020HPT supports it.)
• Priority
The Priority represents PoE ports priority. There are three levels of power priority