PLANET IGS-10020HPT - Manual (Page 525)

User’s Manual of IGS-10020PT / IGS-10020HPT
525
6.14 Thermal Command
Thermal Prio_temp
Description:
Set or show the temperature at which the ports shall be shut down.
Syntax:
Thermal prio_temp [<prio_list>] [<shut_down_temp>]
Parameters:
<prio_list> : List of priorities (0-3)
<shut_down_temp>: Temperature at which ports shall be shut down (0-255 degree C)
Thermal Port_prio
Description:
Set or show the ports priority.
Syntax:
Thermal port_prio [<port_list>] [<prio>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<prio> : Priority (0-3)
Thermal Status
Description:
Shows the chip temperature.
Syntax:
Thermal status