PLANET IGS-10020HPT - Manual (Page 69)

User’s Manual of IGS-10020PT / IGS-10020HPT
69
Figure 4-2-4: Users Configuration Page Screenshot
The page includes the following fields:
Object Description
• User Name
The name identifies the user.
•
Privilege Level The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the full control of the
device. But others value need to refer to each group privilege level. User's
privilege should be the same or greater than the group privilege level to have the
access to that group. By default setting, almost group privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the
system maintenance (software upload, factory defaults, etc.) needs user privilege
level 15. Generally, the privilege level 15 can be used for an administrator
account, privilege level 10 for a standard user account and privilege level 5 for a
guest account.
Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.
Figure 4-2-5: Add / Edit User Configuration Page Screenshot