PLANET IGS-10020HPT - Manual (Page 38)

User’s Manual of IGS-10020PT / IGS-10020HPT
38
■ Reset Button
At the left of the front panel, the reset button is designed for rebooting the Industrial Managed Switch without turning off
and on the power. It also can reset the Industrial Managed Switch to factory default mode.
Figure 2-3: Reset button of Industrial Managed Switch
Reset Button Pressed and Released Function
< 5 sec: System Reboot Reboot the Industrial Managed Switch
> 5 sec: Factory Default
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings as below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
2.1.3 LED Indicators
 System
LED Color Function
P1 Green Lights to indicate that the Switch is powered on by DC1 input.
P2 Green Lights to indicate that the Switch is powered on by DC2 input.
Fault Green Lights to indicate that Switch DC or port has failed.
Ring* Green Lights to indicate that the ERPS Ring has been created successfully.
R.O.* Green Lights to indicate that Switch has enabled Ring Owner.
* = features to be expected in the future