PLANET IGS-10020HPT - Manual (Page 598)

User’s Manual of IGS-10020PT / IGS-10020HPT
598
Default Setting:
5
Loop Protect Shutdown
Description:
Set or show the Loop Protection shutdown time.
Syntax:
Loop Protect Shutdown [<shutdown-time>]
Parameters:
Shutdown time interval (0-604800 seconds)
A value of zero disables re-enabling the port
Default Setting:
10
Loop Protect Port Configuration
Description:
Show Loop Protection port configuration.
Syntax:
Loop Protect Port Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Loop Protect Port Mode
Description:
Set or show the Loop Protection port mode.
Syntax:
Loop Protect Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports