PLANET IGS-10020HPT - Manual (Page 45)

User’s Manual of IGS-10020PT / IGS-10020HPT
45
2.2.2 DIN-Rail Mounting
This section describes how to install the Industrial Managed Switch.
There are two methods to install the Industrial Managed Switch -- DIN-Rail Mounting and Wall Mount Plate Mounting. Please
read the following topics and perform the procedures in the order being presented.
In the installation steps below, this Manual use s IGS-801 (PLANET 8 Port Industrial Gigabit Switch) as the
example. However, the steps for PLANET Industrial Gigabit PoE+ Switch are similar.
Step 1: Screw the DIN-Rail on the Industrial Managed Switch.
Step 2: Lightly insert the bottom of the switch into the track.