PLANET IGS-10020HPT - Manual (Page 373)

User’s Manual of IGS-10020PT / IGS-10020HPT
373
5. COMMAND LINE INTERFACE
5.1 Accessing the CLI
When accessing the management interface for the Industrial Managed Switch via a Telnet connection, the Industrial
Managed Switch can be managed by entering command keywords and parameters at the prompt. Using the Industrial
Managed Switch's command-line interface (CLI) is very similar to entering commands on a UNIX system.
This chapter describes how to use the Command Line Interface (CLI).
5.2 Telnet Login
The Industrial Managed Switch supports telnet for remote management. The Industrial Managed Switch asks for user name
and password for remote login when using telnet, please use “admin” for username & password.