Security network limit aging, Security network limit agetime – PLANET IGS-10020HPT User Manual
Page 455
User’s Manual of IGS-10020PT / IGS-10020HPT
455
Enable the limit mode
IGS-10020HPT:/>security network limit mode enable
Security Network Limit Aging
Description:
Set or show aging enabledness.
Syntax:
Security Network Limit Aging [enable|disable]
Parameters:
enable : Enable aging
disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
IGS-10020HPT:/>security network limit aging enable
Security Network Limit Agetime
Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime [<age_time>]
Parameters:
<age_time>: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
Default Setting:
3600