PLANET VIP-6040PT - Manual (Page 42)

Gigabit Color LCD HD PoE IP Phone (4-Line)
VIP-6040PT
- 42 -
To configure Network via web interface:
1. Click NetworkÆBasic
2. Select the desired Type: DHCP, Static or PPPoE.
3. Fill out the necessary information.
4. Click the Save Set and restart the phone.
Wrong network parameters may result in inaccessibility of user phone
and may also have an impact on user network performance. For more
information about these parameters, contact user system
administrator.
4.3.2 PC Port
Two modes for PC port: bridge and router.
To configure PC Bridge via Phone interface:
1. Press MenuÆSettingÆAdvanced Settings (password: admin) ÆNetworkÆPC
Port ÆBridge mode.
2. Click Save and restart the phone.
To configure PC router via Phone interface:
1. Press MenuÆSettingÆAdvanced Settings (password: admin) ÆNetworkÆPC
Port ÆRouter mode.
2. Enter the IP, Network mask and DHCP server