2 startup the map-3100, Startup the map-3100 12 – PLANET MAP-3100 User Manual
Page 12
Advertising
2.2 Startup the MAP-3100
To get the initial management of the MAP-3100, please follow the steps.
1. Connect the MAP-3100’s LAN port to an active network.
2. Connect the PC to the network as well. This PC must be configured as a DHCP client.
3. Open PC Command Prompt and type “ipconfig /all” to check DHCP Server’s IP as shown
in figure below. In this case, DHCP Server’s IP is 172.16.211.1.
4. Launch web browser and enter MAP private IP (DHCP Server’s IP), for example,
https://172.16.211.1
into URL field. Certificate warning page will display as below.
5. Press “Yes” button to accept the MAP web certificate. Authentication page will display.
Page 12 of 102
Advertising