PLANET MAP-3100 User Manual
Page 33
¾
Datarate – Click on “Datarate” drop down menu to select wireless network
datarate. For example, 1 Mbps, 2 Mps, 5.5 Mbps……
¾
Tx antenna – Click on “Tx antenna” drop down button to select “Diversity”,
“Card Default”, “Port 1”, or “Port 2”.
¾
Rx antenna - Click on “Rx antenna” drop down button to select “Diversity”,
“Card Default”, “Port 1”, or “Port 2”.
¾
Security – Add security features to the wireless network. Click on “Security”
drop down button to select “Open”, “WEP” or “AES”.
o
Open: no encryption or security is applied.
o
WEP: Wired Equivalent Privacy. A encryption using either 64-bit or
128-bit to encrypt the network packets.
o
AES: Advanced Encryption Standard. A encryption scheme that uses
128-bit to encrypt the network packets.
¾
“Apply” button – Click on “Apply” button if you have made any changes.
New settings are active after the device reboot.
Page 33 of 102