14 service > route watchdog (map-3100 only), Service > route watchdog (map-3100 only) 65 – PLANET MAP-3100 User Manual
Page 65
3.4.14
Service > Route Watchdog
(MAP-3100 only)
Route watchdog will probe for default route periodically. If default route is missing, it’ll change
the SSID of active wireless radio to a desired value such as “ServiceDown”. If the default route
still cannot be restored after specified number of interval, the system will be rebooted.
Figure 3.4.14.1: Route watchdog configuration page
To configure Route watchdog service:
• Click on “Active” drop down menu to enable or disable route watchdog service.
• Please specify the desired alert SSID.
• Please specify the interval for the route watchdog to check for the default route.
• Click
on
“Reboot device” drop down menu to enable or disable system reboot.
• Specify the number of retry interval before system reboot.
• Click on “Apply” to save new settings. Please reboot to enable new settings.
Page 65 of 102