PLANET MAP-3100 - Manual (Page 48)

d. From “Configure” field, you can “Modify” or “Remove” MAC Access.
e. If you select to add new MAC Access entry, MAC Access – add page will display as
shown in Figure 3.4.3.2.
Figure 3.4.3.2: MAC Access – add page
MAC Access - add page contain the following parameter:
¾ MAC – Enter the MAC address.
¾ Comments – Enter MAC Access comments.
¾ Active – Click on “Active” drop down menu to enable or disable MAC
Access.
¾ “Apply” button – Click on “Apply” button to confirm add MAC Access. New
settings are active after the device reboot.
f. If you select to edit existing MAC Access, a page similar to Figure 3.4.3.2 with
configured settings will be displayed.
Page 48 of 102