PLANET MAP-3100 - Manual (Page 22)

Bandwidth Mode Setup the bandwidth for Wireless Transmission, Normal 20
MHz and Turbo 40MHz Bandwidth
Default: 20MHz
Mesh Minimum Signal
Strength
Mesh Backhaul Filter. With this numerical value, the Mesh
system will filter the weak connection accorginly. Range from
0 to 60..
Default: 0 (disable)
3.2.4 System > Profile
Profile settings page is shown in Figure 3.2.4.1.
Figure 3.2.4.1: Profile settings page
There are 4 pre-defined profiles in mesh AP. Select the proper profile according to real
operating condition, then click Apply. The profile will be activated after system reboot.
The four modes are:
Indoor Indoor Mode
For indoor operation, operating range around 100 meters
OutdoorLR Outdoor Long Range Mode
For distance above 10km between Mesh nodes.
Be noted, long distance connectivity will effect the overall
performance. Unless there is demand for long distance node
to node bridging, it is not suggested to use this mode for mass
installation.
OutdoorMR Outdoor Middle Rang Mode
For distance above 1km.
Page 22 of 102