PLANET MAP-3100 User Manual
Page 53
Advertising
Figure 3.4.6.1: Traffic Shaping configuration page
To configure Traffic Shaping:
a. Click
on
“Active” drop down menu to enable or disable traffic shaping.
b.
Enter the WAN Uplink Speed in Mbps.
c.
Enter the WAN Downlink Speed in Mbps.
d.
Enter the User Uplink Speed in kbps.
e.
Enter the User Downlink Speed in kbps.
f.
Click on top “Apply” button if you have made any changes.
g. From
“Configuration” field, you can select “Modify” or “Remove” Traffic Shaping
rule.
h.
If you select to add new Traffic Shaping entry, Traffic Shaping – add page will display
as shown in Figure 3.4.6.2.
Page 53 of 102
Advertising