PLANET MAP-3100 User Manual
Page 77
j.
Click on top “Apply” button if you have made any changes. New settings are active
after the device reboot.
k. From
“Configure” field, you can select “Modify” or “Remove” Trap
l.
If you select to add new Trap, Trap server – add page will display as shown in Figure
3.5.5.2.
Figure 3.5.5.2: Trap server – add page
Trap server – add page contain the following parameter:
a.
IP – Enter destination IP to send trap.
b.
Community – Enter community of trap.
c.
Reconfirm Community – Re-enter community to confirm it.
d.
Version – SNMP Version
e.
Comments – Enter Trap comments.
f.
Active – Click on “Active” drop down menu to enable or disable this entry.
g.
“Apply” button –Click on “Apply” button to confirm add new Trap. New settings are
active after the device reboot.
m.
If you select to edit existing Trap server, a page similar to Figure 3.5.5.2 with
configured settings will be displayed.
Page 77 of 102