PLANET MAP-3020 - Manual (Page 67)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 67 of 126
5.3 Configure the Mesh AP
At this section, we will look into every configuration pages of the Mesh AP one by one, and
briefly describe the parameters in the pages.
5.3.1 System > system
The System page is the general settings page of the AP.
1) System Name
Parameters:
• The generic name of the Mesh AP unit.
• Data type: Display String
2) System Location
• The generic physical location name of the Mesh AP Unit
• Data type: Display String
3) System Mode
• The operation mode of the Mesh AP unit
• Options: Gateway, Relay, Client-relay, Layer 2 Gateway, Layer 2 Relay
Gateway Layer 3 Gateway Mode. In a Mesh network Gateway mode is the
path to the Internet for the whole Mesh network behind.
WAN port is active and will be used for Internet Connection.
Three types of Internet connection will be available, please refer
to section 3.3.2 for more.