PLANET MAP-3020 - Manual (Page 75)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 75 of 126
• Network > WAN > Add VLAN Tag
Note that there is an Add VLAN Tag button at the WAN page. Press the button would open
the VLAN Tag page, where user may define the VLAN ID for a desired WAN interface.
Note
1. If your Ethernet network that connect to WAN port supports VLAN
tagging and you plan to make the Mesh Network route for different
purpose, you can use the “Add VLAN Tag” button to create different
VLAN for WAN interface.
2. Only the default WAN is un-tagged. Any other newly inserted WAN
interface will be tagged follow the ID setting that range from 1 to 4095.
Maximum is 15 virtual WAN interfaces are allowed.
1) ID
Parameters (VLAN Tag List columns)
• The VLAN-ID
• Data type: Integer, in between 1 and 4096