PLANET MAP-3020 - Manual (Page 81)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 81 of 126
8) Fragment Threshold
• The Fragment Threshold value
• Data type: Integer, even number only, in between 1500 and 2346
• Default value is 2346
9) DTIM Interval
• Data type: Integer, in between 1 and 256
• Default value is 1
10) Data Rate
• Select the data rate of the interface from the list
• Available selection: Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
11) TX Antenna
• The properties of the transmission antenna
• Available selection: Diversity, Port1, Port2 and Card Default
12) RX Antenna
• The properties of the reception antenna
• Available selection: Diversity, Port1, Port2 and Card Default
13) Current Tx Power (dBm)
• This is a read-only field indicating the current transmission power used by the
mesh interface.
• The value is in the unit of dBm
14) Tx Power (dBm)
• The transmission power field, where user can alter the level of power through the
selection available.
• The default value for this field is Max, which will use the maximum power level of
the wireless interface.
15) Security
• The security type to be used by the wireless network, wither open, WEP, or AES
16) Encryption Key
• The encryption key used in corresponding to the security type used.
• Data type: Octet String