PLANET MAP-3020 - Manual (Page 95)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 95 of 126
5.3.2.1 Services > MAC Access
The Mac Access feature of the Mesh AP provides a filtering method to limit the accessing of
the client. User can set the Mac Access Table to deny or inversely, allow the client that
defined with their Mac Address to attach to the network.
Parameters:
1) Enable MAC Access
• A checkbox to enable or disable the MAC Access feature
2) Filter Type
• Define the filter type of the user not listed in the MAC Access Table, either to
allow or deny the client entries to access the network.
Parameters (MAC Access Table)
1) Mac Address
• The Mac Address of the client to be filtered.
• Data type: Mac Address