PLANET CS-2001 - Manual (Page 267)

256
For B Company, set as below:
Step 1. Under System > Configuration > Multiple Subnets, set as below:
（Figure
11-32）
Figure 11-32 Multiple Subnet Settings
Step 2. Go to Policy Object > VPN > IPSec Autokey, and then click New Entry.
（Figure 11-33）
Figure 11-33 IPSec Autokey Screen
Step 3. Type IPSec_tunnel2 in the Name field and then select Port2 (WAN1) for
WAN Interface. （Figure 11-34）
Figure 11-34 Name and WAN Interface Settings
Step 4. Select Remote Gateway (Static IP or Hostname) for Remote Settings,
and enter the management address of A Company. （Figure 11-35）
Figure 11-35 Remote Settings