PLANET CS-2001 - Manual (Page 333)

322
Step 6. Configure the settings under IPSec Algorithm. Select “3DES” for
Encryption Algorithm and “MD5” for Authentication Algorithm. （Figure
11-135）
Figure 11-135 IPSec Algorithm Settings
Step 7. Select “Group 1” for PFS Key Group. Enter “3600” in the ISAKMP SA
Lifetime field and “28800” in the IPSec SA Lifetime field. （Figure 11-136）
Figure11-136 Advanced Settings of IPSec Autokey
Step 8. Select “Aggressive mode” for Mode, enter @abc123 in the My ID field and
then enter 11.11.11.11 in the Peer ID field. （Figure 11-137）
Figure 11-137 Mode Settings
Step 9. Settings completed.
（Figure 11-138）
Figure 11-138 IPSec Autokey Settings Completed