PLANET CS-2001 - Manual (Page 639)

628
Step 3. Go to Web VPN / SSL VPN > Settings and then set as below:
 Click Modify.
（Figure 21-5）
 Tick Enable Web VPN / SSL VPN.
 Select the IP Version.
 Enter the Client IP address / netmask.
 Select the Encryption Algorithm and the Communication Protocol.
 Enter the Server Port No.
 Configure the Available Subnets.
 Click OK.
（Figure 21-6）
 Click New Entry.
（Figure 21-7）
 Type the name in the Name field.
 Select the authentication account / group from the drop-down list.
 Click OK.
（Figure 21-8）
Figure 21-5 Web VPN / SSL VPN Settings