Configuring rslinx – ProSoft Technology MVI46-DNP User Manual
Page 13
Advertising
Start Here
MVI46-DNP ♦ SLC Platform
Master/Slave Communication Module
ProSoft Technology, Inc.
Page 13 of 143
August 23, 2007
1.6.1 Configuring
RSLinx
¾
If RSLogix is unable to establish communication with the processor,
follow these steps:
1
Open RSLinx.
2
Open the Communications menu, and choose Configure Drivers.
This action opens the Configure Drivers dialog box.
Note:
If the list of configured drivers is blank, you must first choose and configure a
driver from the Available Driver Types list. The recommended driver type to choose for
serial communication with the processor is "RS-232 DF1 Devices".
Advertising