ProSoft Technology MVI46-DNP - Manual (Page 32)

MVI46-DNP ♦ SLC Platform Configuring the Module
Master/Slave Communication Module
Page 32 of 143 ProSoft Technology, Inc.
August 23, 2007
The configuration file is now in a folder on your PC. To view the location of
this folder, open the Transfer menu in Hyperterminal and choose Receive
File.
4 You can now open and edit the file in a text editor such as Notepad. When
you have finished editing the file, save it and close Notepad.
Important: You must name this file DNP.CFG before you transfer it to the module.
The module will not recognize configuration files with any other name or extension.
2.4.2 Transferring the Configuration File to the Module
Perform the following steps to transfer a configuration file from your PC to the
module.
1
Connect your PC to the Configuration/Debug port of the module using a
terminal program such as HyperTerminal. Press [?] to display the main
menu.