ProSoft Technology MVI46-DNP - Manual (Page 99)

Reference MVI46-DNP ♦ SLC Platform
Master/Slave Communication Module
ProSoft Technology, Inc. Page 99 of 143
August 23, 2007
Error Code Name Description
107 Invalid analog input deadband Deadband value for analog input events is out of range.
Value must be in the range of 0 to 32767.
108 Not enough memory There is not enough memory in the module to configure
the module as specified.
109 Invalid block transfer delay for blocks 251 and
252 (error/status blocks) Block transfer delay value specified is too low.
110 File count invalid The file count must be in the range of 0 to 6.
111 Invalid file record size The file record size must be in the range of 1 to 120.
112 Invalid block identification code for file The file block transfer code must be in the range of 100
to 120.
DNP Port Configuration Error
Error Code Name Description
212 Invalid DNP address The DNP address specified in the configuration is not
valid (0 to 65534).
213 Invalid DNP port baud rate The baud rate code specified in the configuration is not
valid.
219 Invalid DNP data link layer confirm mode The data link confirmation mode code is not valid in the
configuration.
220 Invalid DNP data link confirm time-out The data link time-out period specified in the
configuration is 0. It must be an integer in the range of 1
to 65535.
222 Invalid DNP select/operate arm time duration The select/operate arm timer is set to 0. It must be an
integer in the range of 1 to 65535.
223 Invalid DNP application layer confirm time-out The application layer confirm time-out value is set to 0.
It must be an integer in the range of 1 to 65535.
224 Invalid DNP write time interval The write time interval is not in the data range in the
configuration. The value must be in the range of 0 to
1440.
225 Invalid DNP unsolicited response mode The unsolicited response mode code is not valid in the
configuration.
226 Invalid DNP unsolicited response minimum
quantity for Class 1 The unsolicited response minimum quantity for Class 1
is not valid in the configuration. Value must be an
integer in the range of 1 to 255.
227 Invalid DNP unsolicited response minimum
quantity for Class 2 The unsolicited response minimum quantity for Class 2
is not valid in the configuration. Value must be an
integer in the range of 1 to 255.
228 Invalid DNP unsolicited response minimum
quantity for Class 3 The unsolicited response minimum quantity for Class 3
is not valid in the configuration. Value must be an
integer in the range of 1 to 255.
230 Invalid DNP unsolicited response destination
address The unsolicited response destination address is not
valid in the configuration. Value must be in the range of
1 to 65534.
Debug Port Configuration Errors
Error Code Name Description
340 Invalid Debug Port baud rate The baud rate code specified in the configuration is not
valid.