Connect your pc to the module – ProSoft Technology MVI46-DNP User Manual
Page 15
Advertising
Start Here
MVI46-DNP ♦ SLC Platform
Master/Slave Communication Module
ProSoft Technology, Inc.
Page 15 of 143
August 23, 2007
1.7
Connect your PC to the Module
With the module securely mounted, connect your PC to the Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null Modem Cable.
1
Attach both cables as shown.
2
Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3
Attach the other end to the serial port on your PC or laptop.
Advertising