ProSoft Technology PTQ-104C - Manual (Page 127)

49TPTQ-104C ♦ 48TQuantum Platform Reference
47TIEC 60870-5-104 Client
12TUser Manual
Transmission of Integrated totals
(Station- or object-specific parameter, mark "X" if function is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)

Mode A: Local freeze with spontaneous transmission
 Mode B: Local freeze with counter interrogation
 Mode C: Freeze and transmit by counter-interrogation commands
 Mode D: Freeze by counter-interrogation command, frozen values
reported spontaneously

Counter read
 Counter freeze without reset
 Counter freeze with reset

Counter reset

General request counter
 Request counter group 1
 Request counter group 2
 Request counter group 3
 Request counter group 4
Parameter loading
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Threshold value
 Smoothing factor
 Low limit for transmission of measured value

High limit for transmission of measured value
Parameter activation
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Activation/Deactivation of persistent cyclic or periodic transmission of the
addressed object
ProSoft Technology, Inc. Page 127 of 136
March 4, 2013