ProSoft Technology PTQ-104C User Manual
Page 35
Advertising
![background image](/files/866171/content/doc035.png)
49TPTQ-104C ♦ 48TQuantum Platform
Configuring the Processor with ProWORX
47TIEC 60870-5-104 Client
12TUser Manual
5 Close the Schneider Alliances application.
6 Run the ProWORX 32 software. Whether a new or existing project is used,
click on theTraffic Cop section to display the rack to be edited.
7 Highlight Slot x by clicking on the slot in the rack display. In this case, the
PTQ module will be placed in slot 3.
ProSoft Technology, Inc.
Page 35 of 136
March 4, 2013
Advertising