ProSoft Technology PTQ-104C User Manual
Page 17
Advertising
49TPTQ-104C ♦ 48TQuantum Platform
Start Here
47TIEC 60870-5-104 Client
12TUser Manual
1.5
Connecting the PC to the ProTalk Configuration/Debug Port
Make sure the Quantum programming software is closed before performing
these steps. This action will avoid serial port conflict.
Using the supplied Null Modem cable, connect the PC to the
Configuration/Debug port on the ProTalk module as shown
To connect to the module’s Configuration/Debug serial port
1 Start PCB, and then select the module to test. Click the right mouse button to
open a shortcut menu.
ProSoft Technology, Inc.
Page 17 of 136
March 4, 2013
Advertising