ProSoft Technology PTQ-104C - Manual (Page 129)

49TPTQ-104C ♦ 48TQuantum Platform Reference
47TIEC 60870-5-104 Client
12TUser Manual
Port number
Parameter Value Remarks
Port number 2404 In all cases
Redundant connections
Number N of redundancy group connections used
RFC 2200 suite
RFC 2200 is an official Internet Standard which describes the state of
standardization of protocols used in the Internet as determined by the Internet
Architecture Board (IAB). It offers a broad spectrum of actual standards used in
the Internet. The suitable selection of documents from RFC 2200 defined in this
standard for given projects has to be chosen by the user of this standard.

Ethernet 802.3
 Serial X.21 interface
 Other selection from RFC 2200
9.7 Frequently Asked Questions
9.7.1 How do I configure the module?
The ProTalk module requires a configuration file to be edited and downloaded
using ProSoft Configuration Builder (PCB). An overview of the backplane
communications with the PLC can be found in the Module Configuration section
of this manual (page 62). For more in-depth information, refer to Backplane Data
Exchange (page 44).
9.7.2 What kind of data transfer rates can I expect between the PLC
and the module?
Data transfer rates between the PLC and the module depend on a number of
variables, among them are the number of words being transferred per command,
the amount of other network traffic at the time data is being transferred, and
overall processor scan times.
9.7.3 Does the module work in a remote rack?
The module is designed to be located in the chassis with the PLC and will not
operate in a remote chassis.
9.7.4 Can I use the module in a hot backup system?
The PTQ-104C module supports the 140CPU67160 Hot Standby processor.
Refer to Hot Standby Support (page 81) for setup and configuration instructions.
0
ProSoft Technology, Inc. Page 129 of 136
March 4, 2013