Canon PowerShot SX60 HS - Manual (Page 124)

124
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
6
Choose a smartphone to connect to.
● Press the [ ][ ] buttons to choose the
smartphone, and then press the [ ]
button.
● After a connection is established with
the smartphone, the smartphone name
is displayed on the camera. (This screen
will close in about one minute.)
7
Import images.
● Use the smartphone to import images
from the camera to the smartphone.
● Use the smartphone to end the
connection; the camera will automatically
turn off.
● When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone.
This may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
3
Choose [ ].
● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
● The camera’s SSID is displayed.
4
Connect the smartphone to the
network.
● In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
5
Start CameraWindow.
● For an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
( ) will start CameraWindow on the
smartphone.
● For other smartphones, start
CameraWindow on the smartphone.
● After the camera recognizes the
smartphone, a device selection screen is
displayed.