Canon PowerShot SX60 HS - Manual (Page 88)

88
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Changing the Flash Timing
Still Images Movies
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
● Press the [ ] button, choose [Flash
Control] on the [ ] tab, and then press
the [ ] button (= 30).
2
Configure the setting.
● Choose [Shutter Sync.], and then choose
the desired option (= 30).
1st-curtain The flash fires immediately after the shutter opens.
2nd-curtain The flash fires immediately before the shutter closes.
Shooting with the FE Lock
Still Images Movies
Just as with the AE lock (= 72), you can lock the exposure for the flash
shots.
1
Lift the flash and set the flash to [ ]
(= 86).
2
Lock the flash exposure.
● Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
[ ] button.
● The flash fires, and when
[ ] is displayed, the flash output level is
retained.
● To unlock FE, release the shutter button
and press the [ ] button again. In this
case, [ ] is no longer displayed.
3
Compose the shot and shoot.
● After one shot, FE is unlocked and [ ] is
no longer displayed.
● FE: Flash Exposure