Canon PowerShot SX60 HS User Manual
Page 41
41
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
4
P Mode
Easily Composing Shots after Manual Zooming
(Framing Assist – Lock)
Still Images
Movies
You can reduce camera shake at the telephoto end, which makes it easier
to compose shots.
1
Compensate camera shake at the
telephoto end.
●
Press and hold the [ ] button. [ ] is
displayed, and image stabilization optimal
for shooting at the telephoto end is
applied.
2
Shoot.
●
While holding the [ ] button, press the
shutter button halfway to focus on the
subject, and then press it all the way
down.
●
The zoom factor cannot be adjusted by pressing the [
] button
(= 40) while you are holding down the [
] button.
●
Recomposing the shot while holding down the [
] button may
make image stabilization less effective. In this case, [
] is
displayed in gray. If this occurs, release the [
] button, compose
the shot, and then press it again.
●
If you start recording a movie while holding down the [
] button,
image stabilization may cause the shot to be recomposed.
2
Reacquire the subject.
●
Aim the camera so that the subject enters
the white frame, and then release the
[ ] button.
●
The previous magnification is now
restored, so that the area within the white
frame fills the screen again.
●
Some shooting information is not displayed while the camera is
zoomed out.
●
During movie shooting, the white frame is not displayed if you
press the [
] button. Also note that a changed zoom factor and
camera operating sounds are recorded.
●
If you prefer to shoot at the zoom factor of the screen in step 1,
press the shutter button all the way down.
●
You can adjust the zoom factor that the camera reverts to when
you release the [
] button by moving the zoom lever to resize
the white frame while you hold the [
] button.
●
To adjust the area displayed when the [
] button is pressed,
] tab ► [
Display Area], and
choose one of the three options.
●
The zoom factor cannot be changed with the [
] button after
you press the shutter button all the way down in self-timer mode
(= 44).