Zebra [91, Exposure set. guide [92, Zebra – Sony Cyber-shot RX10 III User Manual

Page 104: Exposure set. guide

Advertising
background image

Applies the exposure compensation value to control ambient light only.

[91] How to Use

Using shooting functions

Adjusting the exposure

Zebra

The zebra pattern will appear over part of an image if the brightness level of that part meets

the IRE level that you set. Use this zebra pattern as a guide to adjust the brightness.

1. MENU

(Custom Settings)

→ [Zebra] → desired setting.

Menu item details

Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/Custom1/Custom2:
Adjusts the brightness level.

Hint

You can register multiple values for [Zebra] to check the exposure and the flare as well as

the brightness level. The settings for exposure confirmation and flare confirmation are

registered to [Custom1] and [Custom2] respectively by default.

To check exposure, set a standard value and the range for the brightness level. The

zebra pattern will appear on areas that fall within the range you set.

To check flare, set a minimum value for the brightness level. The zebra pattern will appear

on areas that exceed the value you set.

Note

The zebra pattern is not displayed during HDMI connection.

[92] How to Use

Using shooting functions

Adjusting the exposure

Exposure Set. Guide

You can set whether to display a guide when you change the exposure.

1. MENU

(Custom Settings)

→ [Exposure Set. Guide] → desired setting.

Menu item details

Advertising