Effective use of the battery pack, Remaining battery indicator, How to store the battery pack – Sony Cyber-shot RX10 III User Manual

Page 240

Advertising
background image

(77 °F). Charging may take longer depending on conditions of use and circumstances.

Effective use of the battery pack

Battery performance decreases in low temperature environments. So in cold places, the

operational time of the battery pack is shorter. To ensure longer battery pack use, we

recommend putting the battery pack in your pocket close to your body to warm it up, and

insert it in the product immediately before you start shooting. If there are any metal

objects such as keys in your pocket, be careful of causing a short-circuit.

The battery pack will run down quickly if you use the flash or continuous shooting function

frequently, turn the power on/off frequently, or set the monitor very bright.

We recommend preparing spare battery packs and taking trial shots before taking the

actual shots.

Do not expose the battery pack to water. The battery pack is not water-resistant.

Do not leave the battery pack in extremely hot places, such as in a car or under direct

sunlight.

If the battery terminal is dirty, you may not be able to turn on the product or the battery

pack may not be properly charged. In that case, clean the battery by lightly wiping off any

dust using a soft cloth or a cotton swab.

Remaining battery indicator

The remaining battery indicator appears on the screen.


A: Battery level high
B: Battery exhausted
It takes about one minute for the correct remaining battery indicator to appear.

The correct remaining battery indicator may not be displayed under some operating or

environmental conditions.

If the remaining battery time does not appear on the screen, press the DISP (Display

Setting) button to display it.

How to store the battery pack

To maintain the battery pack’s function, charge the battery pack and then fully discharge it

in the product at least once a year before storing it. Remove the battery pack from the

camera and store the battery in a cool, dry place.

To use the battery pack up, leave the product in slide show playback mode until the

power goes off.

To prevent staining the terminal, short-circuiting, etc., be sure to use a plastic bag to keep

away from metal materials when carrying or storing the battery pack.

Advertising