Sony Cyber-shot RX10 III - Manual (Page 114)

[102] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
DRO Bracket
You can record a total of three images, each at a different degree of D-Range Optimizer
value.
1. MENU
→
(Camera Settings)
→ [Drive Mode] → [DRO Bracket].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
DRO Bracket: Lo:
Records a series of three images with small changes in the D-Range Optimizer value.
DRO Bracket: Hi:
Records a series of three images with large changes in the D-Range Optimizer value.
Note
The last shot is shown on the Auto Review.
[103] How to Use Using shooting functions Selecting a drive mode (Continuous
shooting/Self-timer)
Settings for bracket shooting
You can set the self-timer in bracket shooting mode, and the shooting order for exposure
bracketing and white balance bracketing.
1. MENU
→
(Camera Settings
) → [Drive Mode] → select bracket shooting mode.
2. MENU
→
(Camera Settings
) → [Bracket Settings] → desired setting.
Menu item details
Selftimer during Brkt:
Sets whether to use the self-timer during bracket shooting. Also sets the number of seconds
until the shutter is released if using the self-timer.
(OFF/2 Sec/5 Sec/10 Sec)
Bracket order: