Sony Cyber-shot RX10 III - Manual (Page 56)

(Superior Auto):
Allows you to shoot with automatic scene recognition. This mode takes clear images of dark
or backlit scenes.
P (Program Auto):
Allows you to adjust various shooting settings such as white balance or ISO value, etc.
Aperture value and shutter speed are automatically set by the camera.
Hint
In [Superior Auto] mode and when the (overlay icon) is displayed, be sure not to
move the camera before the multiple shots are recorded.
In [Program Auto] mode, you can change the combination of shutter speed and aperture
value while maintaining the correct exposure by turning the control dial. This function is
called "Program Shift" (
P*).
Note
In [Superior Auto] mode, the recording process takes longer, since the product creates a
composite image. In this case, the (overlay icon) is displayed and the shutter sound
is heard multiple times, but only one image is recorded.
For [Intelligent Auto] and [Superior Auto] mode, most of the functions are set
automatically, and you cannot adjust the settings on your own.
[33] How to Use Shooting Selecting a shooting mode
Program Auto
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and
the aperture value).
You can set shooting functions such as [ISO].
1. Set the mode dial to P (Program Auto).
2. Set the shooting functions to your desired settings.
3. Adjust the focus and shoot the subject.
Program Shift
You can change the shutter speed and aperture (F-value) combination by rotating the
control dial, without changing the appropriate exposure that is set by this product. This
function is available when you do not use the flash.
“P” on the screen changes to “P*” when you turn the control dial.
To cancel program shift, set the shooting mode to other than [Program Auto], or turn off