Sony Cyber-shot RX10 III - Manual (Page 242)

shooting. If this happens, save your images to a computer or other storage location, then
execute [Format].
Memory card formatted with a computer is not guaranteed to operate with the product.
Data read/write speeds differ depending on the combination of the memory card and the
equipment used.
We recommend backing up important data, such as to a hard disk of a computer.
Do not attach a label on the memory card itself nor on a memory card adaptor.
Do not touch the terminal section of the memory card with your hand or a metal object.
Do not strike, bend or drop the memory card.
Do not disassemble or modify the memory card.
Do not expose the memory card to water.
Do not leave the memory card within the reach of small children. They might accidentally
swallow it.
The memory card may be hot just after it has been used for a long time. Be careful when
you handle it.
Do not remove the battery pack or the memory card or turn the camera off while the
access lamp is illuminated. This may cause the data on the memory card to become
damaged.
If the memory card is used near areas with strong magnetization, or used in locations
subject to static electricity or electrical noise, the data on the memory card may become
damaged.
Do not insert a memory card that does not fit the memory card slot. Doing so will cause a
malfunction.
Do not use or store the memory card under the following conditions:
High temperature locations such as in a car parked under the sun
Locations exposed to direct sunlight
Humid locations or locations with corrosive substances present
To use a Memory Stick Micro media with this product, be sure to insert the Memory Stick
Micro media into an M2 Adaptor as large as Duo size. If you insert a Memory Stick Micro
media into the product without an M2 Adaptor as large as Duo size, you might not be able
to remove it from the product.
To use a microSD memory card with this product, be sure to insert the microSD memory
card into a dedicated adaptor.
When inserting a memory card into a memory card adaptor, be sure that the memory card
is inserted in the correct direction and then insert it as far as it will go. If the card is not
inserted properly, it may result in a malfunction.
[279] How to Use Precautions/This product Cleaning this product
On cleaning