Sony Cyber-shot RX10 III - Manual (Page 77)

[54] How to Use Using shooting functions Using the flash
Notes on using the flash
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the indicator flashes. When the charging of the flash is
finished, the indicator lights up.
When an external flash (sold separately) is attached to the Multi Interface Shoe, the state
of the external flash has priority over the flash setting of this product, and you cannot use
the internal flash of this product.
Do not use a commercially available flash with high-voltage synchro terminals or with
reverse polarity, it may cause a malfunction.
[55] How to Use Using shooting functions Using the flash
Flash Mode
You can set the flash mode.
1. MENU
→
(Camera Settings)
→ [Flash Mode] → desired setting.
Menu item details
Flash Off:
The flash does not operate.
Autoflash:
The flash works in dark environments or when shooting towards bright light.
Fill-flash:
The flash works every time you trigger the shutter.
Slow Sync.:
The flash works every time you trigger the shutter. Slow sync shooting allows you to shoot a
clear image of both the subject and the background by slowing the shutter speed.
Rear Sync.:
The flash works right before the exposure is completed every time you trigger the shutter.