Sony Cyber-shot RX10 III - Manual (Page 193)

1. MENU
→
(Setup
) → [HDMI Settings] → [
REC Control]
→ desired setting.
Menu item details
On:
The camera can send a recording command to an external recorder/player.
The camera is sending a recording command to an external recorder/player.
Off:
The camera is not able to send a command to an external recorder/player to start/stop
recording.
Note
Available for external recorders/players compatible with [ REC Control].
When [ TC Output] is [Off], [ REC Control] is set to [Off].
Even when is displayed, the external recorder/player may not work properly
depending on the settings or status of the recorder/player. Check if the external
recorder/player works properly before use.
[210] How to Use Changing settings Setup menu
4K Output Sel. (movie)
You can set how to record movies and perform HDMI output when your camera is connected
to 4K-compatible external recording/playback devices, etc.
1. Turn the mode dial to (movie).
2. Connect the camera to the desired device via an HDMI cable.
3.
MENU→
(Setup
)→[
4K Output Sel.]
→desired setting.
Menu item details
Memory Card+HDMI:
Simultaneously outputs to the external recording/playback device and records on the
camera's memory card.
HDMI Only(30p):
Outputs a 4K movie in 30p to the external recording/playback device without recording on
the camera's memory card.
HDMI Only(24p):