Replacing the remote control batteries – Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual

Page 125

Advertising
background image

125

7.

Lift the projector on the side of the air filter, close the air filter cover, and tighten the screws.

Parent topic:

Air Filter and Vent Maintenance

Related tasks

Turning Off the Projector

Replacing the Remote Control Batteries

The remote control uses two AAA manganese or alkaline batteries. Replace the batteries as soon as
they run out.

Caution:

Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

Note:

Your remote may look different but the steps are the same.

1.

Remove the battery cover as shown.

Advertising