Installing batteries in the remote control – Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual
Page 38
Advertising
38
4.
Connect the stereo mini-jack end of the cable to your projector's
Audio Out
port.
Parent topic:
Installing Batteries in the Remote Control
The remote control uses two AAA manganese or alkaline batteries that came with the projector.
Caution:
Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
Note:
Your remote may look different but the steps are the same.
1.
Remove the battery cover.
Advertising