Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual
Page 83
83
2.
Select the
Settings
menu and press
Enter
.
3.
Select the
Lock Setting
setting and press
Enter
.
4.
Select one of these lock types and press
Enter
:
• To lock the projector's power button, select
Child Lock
. This setting is enabled once the projector
is turned off. To turn the projector on, you must press the projector's power button for longer than
three seconds.
Note: Child Lock
does not prevent the projector from turning on when the power cord is
connected if the
Direct Power On Setting
is set to
On
.
• To lock all buttons, select
Control Panel Lock
>
Full Lock
. This setting is enabled once you exit
the configuration menu.
• To lock all buttons except the power button, select
Control Panel Lock
>
Partial Lock
. This
setting is enabled once you exit the configuration menu.
Note:
The
lock icon is displayed on the screen if any control panel buttons are pressed while
this setting is enabled.
You see a confirmation prompt.
5.
Select
Yes
and press
Enter
.