Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) User Manual
Page 138
138
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Make sure the
Light Output
setting in the Image menu is set correctly.
• Position the projector close enough to the screen.
• If the above solutions do not correct your image, try resetting all of the projector's settings using the
Reset menu.
Parent topic:
Solving Image or Sound Problems
Related concepts
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Reset Options - Reset Menu
Solutions When a 3D Image Does Not Display Correctly
If a 3D image does not display correctly, try the following solutions:
• Make sure the
3D Display
setting on the Signal menu is set to
Auto
or
3D
.
• Make sure your video device and media are both 3D-compatible. Refer to the documentation that
came with your video device for more information.
• Make sure you are using an HDMI cable that supports 3D signals.
• Make sure you selected the correct
3D Format
setting on the Signal menu. Normally this should be
set to
Auto
, but in some cases you may need to select a different setting to match the 3D signal from
your video device.
• Make sure you are using RF 3D active shutter glasses.
• Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby
mode, turn them off and then back on.
• Make sure your 3D glasses are paired with the projector.
• Adjust the
3D Depth
and
3D Brightness
settings on the Signal menu. If the setting is too high, you
may have 3D crosstalk or image ghosting.
• Make sure you are within the 3D viewing range.
• Make sure your screen size matches the
Diagonal Screen Size
setting on the Signal menu.