Epson 100" EpiqVision Ultra LS500 4000-Lumen Pixel-Shift 4K UHD 3LCD Laser Projector TV System with 100" Screen (White Projector) - Manual (Page 61)

61
is turned off. If you change the projector's installation position or angle, you may need to make
adjustments again.
1. Turn on the projector and display an image.
2. Press the Menu button on the projector's control panel or remote control.
3. Select Settings and press Enter .
4. Select Image Shift and press Enter .
5. Use the arrow buttons on the projector or remote control to adjust the image position.
6. When you are finished, press the Menu button to exit.