MOTU UltraLite-mk5 USB-C Audio/MIDI Interface - Manual (Page 43)

C U E M I X 5
43
MIX INPUT METERS
The Mix input Meters menu (item #5 on page 33)
offers two settings: Pre-fader or Post-fader . This
setting lets you choose whether the input meters
in CueMix 5 display levels before or after the
signal passes through the fader’s gain stage.
☛ Post-fader metering is calculated as the
Post-FX send level, plus the fader value. Therefore,
if the pre-fader signal goes above zero dBFS, the
resulting post-fader meter value will not include
the magnitude of the signal above zero dBFS.
SAVING AND RECALLING DEVICE PRESETS
Use the Save and Load buttons in the CueMix 5
Device tab (item #9 on page 33) to save and recall
UltraLite-mk5 device presets to your computer
hard drive. A preset saves the entire state of the
UltraLite-mk5 interface, including all device
settings, mixes and effects settings.
THE CUEMIX 5 IOS APP
CueMix 5 is also available as an app for iOS and
allows you to control the UltraLite-mk5 from your
iOS device. Simply download it from the App
Store. Also see “iOS setup (USB-C)” on page 21
and “iOS setup (Lightning)” on page 22.