Canon EOS R6 Mark II Mirrorless Camera with 24-105mm f/4-7.1 Lens User Manual
Page 422
Caution
Movie digital IS will not function when the lens's optical Image Stabilizer switch is
set to <
>.
With non-IS lenses, setting [
Digital IS
] to [
On
] or [
Enhanced
] also sets [
IS
mode
] to [
On
].
Stabilization by Movie digital IS may be less effective at some movie recording
sizes.
The wider the angle of view (wide angle), the more effective the image stabilization
will be. The narrower the angle of view (telephoto), the less effective the image
stabilization will be.
When using a tripod, setting Movie digital IS to [
Off
] is recommended.
Depending on the subject and shooting conditions, the subject may blur noticeably
(the subject momentarily looks out of focus) due to the effects of the Movie digital
IS.
Consider setting to [
Off
] when using a TS-E lens or fish-eye lens.
Since Movie digital IS magnifies the image, the image looks more grainy. Noise,
dots of light, etc. may also become noticeable.
Note
For details on configuring image stabilization for still photo shooting, see
.
With some lenses, even more effective stabilization (indicated by “+” next to the IS
icon) is possible when the lens's IS is used in conjunction with IS on the camera.
For details on lenses compatible with this feature, visit the Canon website (
422