Canon EOS R6 Mark II Mirrorless Camera with 24-105mm f/4-7.1 Lens User Manual
Page 447
+
Enables movie display both on the camera screen and on the other device, via HDMI
output.
Camera operations such as image playback or menu display are shown on the other
device via HDMI, not on the camera screen.
Deactivates the camera screen during output via HDMI, so that the screen is blank.
Shooting information, AF points, and other information is included in HDMI output and
shown on any monitors connected to the external recording device, but you can stop
output of this information by pressing the <
> button.
Before recording movies externally, confirm that no information is being sent by the
camera by making sure no shooting information, AF points, and so on is displayed on
external monitors or other devices.
Caution
Card recording is not performed with [
:
HDMI display
] set to [
+
]. Camera
menus and image playback are only displayed on the screen connected via HDMI.
The HDMI output resolution and frame rate are automatically adjusted to suit the
movie recording size.
For longer HDMI output
To continue HDMI output for longer than 30 min., select [
+
], then set [
Auto power
off
] in [ :
Power saving
] to [
Disable
). HDMI output will continue after the camera
screen turns off when the time set in [
Screen off
] elapses.
Caution
HDMI output without information prevents display of warnings about the card
space, battery level, or high internal temperature (
During HDMI output, display of the next image may take some time if you switch
between movies of different recording sizes or frame rates.
Avoid operating the camera when recording movies to external devices, which may
cause information to be displayed in the HDMI video output.
Brightness and color of movies recorded with the camera may look different from
that of HDMI video output recorded by external devices, depending on the viewing
environment.
Note
By pressing the <
> button, you can change the information displayed.
Time codes can be added to HDMI video output (
Audio is also output via HDMI, except when [
Sound rec.
] is set to [
Disable
].
447